Care Instructions for Polished Marble

General Description:
“Thermarium” Baeder-Bau GmbH uses polished marble mainly in heat baths areas and due to the product care less in areas of steam baths. It is necessary to consider following cleaning and care instructions in regular intervals (depending on the degree of staining, but at least in half-yearly intervals) to permanently maintain the colour and the polish.

Products:

Construction site cleaning:

[m2/liter]

Construction dirt
in general                      ->      Lithofin MN Power-Clean        ->       20

Oil and grease dirt          ->      Lithofin MN Intensive Cleaner ->        7

Cement veil on polished            Lithofin MN Power-Clean &
and antique marble         ->      whitepad or steel wool 000    ->       10

Cement veil on naturally           Lithofin MN
rough textured quartzit    ->      Cement Veil Remover           ->       10

Other stains                    ->      Check with your specialist dealer

Dirt Treatment:

[m2/liter]

Invisible impregnation
against oil, grease,          ->     Lithofin MN Stain-Sop            ->       20
water, and dirt

Color Intensification         ->    Lithofin MN Intensive Cleaner ->        7

Color Intensification of             Lithofin MN Shine Sealer
polished surfaces             ->    diluted                                  ->      25

Color Intensification of             Lithofin MN Care-Sheen
polished surfaces             ->    diluted                                  ->     200

Color Intensification of             Lithofin MN Color Intensifier or
rough surfaces                ->     Lithofin MN Slate-Seal            ->       10

Product Care:

Ongoing care                  ->     Lithofin MN Easy-Care Cleaner

Shine care                      ->     Lithofin MN Care-Sheen - occasionally

Cleaning:
Please notice that marble, like every limestone, is corroded by acid containing substances like vinegar, lemon juice, acid containing detergents, etc. This means that the polish will be destroyed. Highly fat dissolving cleaning agents, soft soap and the like products leach out the natural stone and may leave visible residua or cause a faster soiling of the stone. Please avoid the contact of these substances with the polished marble. The marble may also not be treated with scratching or sanding materials, like pot cleaning sponges or abrasive powder.
Water spots, especially if the water is hard, but also crèmes, lotions, soap leftovers, washing powder, etc, may be wiped up as soon as possible. Already built-up calcifications may be carefully removed with a hard sponge (white pad).

Product Care:
The impregnation may be done with "Lithofin MN Stain-stop". Only absolutely clean and dry surfaces may be impregnated. The impregnation makes the stone water and oil repellent. The impregnation may prevent discoloring through moisture, and stains may be removed more easily. The marble is easier to clean and the beautiful surface remains clean.

Time Interval:
The cleaning has to take place, depending on the staining, as soon as possible.
The product care may depends on the degree of soiling, but may take place at least half-yearly.

Safety related Details:
Please pay attention to the detailed instructions on the package.

Back to the service page.